P-Traps can be found at almost any fixture that drains water and are designed to prevent hazardous sewer gases from entering the building. A P-Trap is comprised of a curved “trap” called a J-Bend and a drain pipe called a Wall Bend. The Tailpiece on the Lavatory Drain fits into the P-Trap J-Bend, connecting to the Wall Bend, which then enters the wall. They are available with or without cleanout plugs. If one with a cleanout plug is installed it can be cleaned without removing and installing a new trap.
S-Traps are also used to prevent hazardous sewer gases from entering buildings, and are designed to drain into plumbing below the floor for installations where there is no access to plumbing directly behind the wall.
Because of their shape, J-Bends retain a small amount of water after the fixture’s use. This water in the trap creates a seal that prevents sewer gas from passing from the drain pipes back into the occupied space of a building or home.
Vanity Traps are P-Traps which feature an extra-long (15”) Wall Bend to accommodate deeper Vanity installations.
“OS&B® Traps are warranted for 5 years, from date of purchase, against workmanship and/or material defects. Buy Quality. Buy OS&B® Traps for your next plumbing project.”
Vanity Traps 15” Wall Bend
Sink Traps-Cast Elbow
With trend setting innovations like our Clicker® Closure mechanism and our Daisy™ Grid Drain, OS&B® has set a new standard in Lavatory (Lav) Drain technology. OS&B® has all of your Lav Drain needs covered with a complete selection available in a variety of materials, configurations, sizes and finishes.
Plug & Chain
Lift & Turn
Bath Tub Drain Trim Update Kits
Integral Tub Drains
Shower Drains for Molded Bases
Shower Pan Drains
Side Discharge Shower Drains
Testable Shower Drains for Preformed Shower Bases
Freestanding Tub Drains
Wood Deck Drains
OS&B®, founded in 1975, is a leading Manufacturer and Distributor of Plumbing Products. Located in Oakville Ontario, OS&B® is Canada’s largest manufacturer and Distributor of Waste & Overflows, Traps, Lavatory Drains, Tubular Brass Fittings and various other Plumbing parts.
OS&B® services the Wholesale and Retail Industries. We also manufacture for and supply to some of the largest OEM brands in the world offering in-house product design and testing in order to address specific needs and requirements. Exclusive trademarks of OS&B® include Clicker™, Cable-Drive® and Fill&Drain™.
OS&B® has earned a reputation for offering innovative and high quality products at competitive prices. Our products come in many of today’s most popular finishes, including Brushed Nickel, Pearl Nickel and Venetian Bronze.
“OS&B® is a leading supplier of plumbing parts. Buy quality from a company you can trust.”
For more information visit: About Us
OS&B is committed to being environmentally responsible. As of 2014, through material recycling efforts, we no longer are required to submit a TRA report to the MOE.
In addition, over the last 10 years, OS&B has:
In the years to come, OS&B will continue to reduce our environmental footprint.
OS&B Toxic Reduction Act Public Information
OS&B Toxic Reduction Act Public Information Report 2011
OS&B Copper Toxic Reduction Act Plan Summary 2012
OS&B Toxic Reduction Act Public Information Report 2012
For more information visit: Environmental Polices
OS&B® Products are available in most of today’s popular finishes. From the clean and contemporary look of Chrome or Brushed Nickel to the sumptuous and warm tones of Venetian Bronze, OS&B® has the Finish that will help you achieve a comprehensive and coherent design.
Brass Chrome Plated
Brass Matte Black
The following are Registered Trademarks to Oakville Stamping & Bending Limited:
The following Patents are registered to Oakville Stamping & Bending Limited:
Canadian Patent # 2791877
US Patent #9,204,762
Canadian Patent # CA 2479043
Island Tub Drain™ is Patented in Canada and the United States of America.
Canada Patent #: 2,813,010
US Patent #: 9,551,138
Canadian Patent Pending US Patent # 8266735
The following are Trademarks of Oakville Stamping & Bending Limited:
Clicker™ and its guise are a Registered Trademark of Oakville Stamping and Bending Ltd.
OS&B® products are warranted for 5 years, from date of purchase, against workmanship and/or material defects only. Exception: Flex Connectors are warranted for 1 year, from date of purchase, against workmanship and/or material defects only. OS&B® is not responsible for any labour incurred to replace or repair product.